ACETONE

An efficient, powerful solvent used to thin fiberglass resin mixtures, dissolve two part epoxies and clean tools used for lacquers and epoxies. Fast drying.

TIP: Acetone may be diluted with water, to reduce its strength, when cleaning vinyl or fiberglass surfaces. Excellent for removing adhesive left by price labels on glassware, porcelain.

KEROSENE

A pure, water white high grade fuel primarily used for kerosene stoves and heaters. Kerosene is the weakest, slowest evaporating of the petroleum solvents. Will work as an economical degreaser but leaves an oily film, which, if surface is to be painted can be removed with Varsol/Mineral Spirits.

PARTS CLEANER / PAINT-X THINNER

Mineral Spirits. A solvent cleaner used to pre-clean paintwork or alkyd (oil based) paint from brushes, thinning alkyd paints, varnishes and polyurethane, cleaning automotive tools, parts wash equipment, prior to reassembly or painting. Fast acting on oil and grease, will not damage most dried paints and when clean, final wash solvent is used, leaves little residue.

MOTOR SHAMPOO

Clean engines not only look better, they work better developing fewer problems than greasy ones! Quickly penetrates baked on grease and dirt, then lifts it off when sprayed with clean water. Fast, effective sprayon, hose off formula. Harmless to paint and electric wiring harness or components. Excellent for all automotive engines.

OR119 GUN WASH

A professional, high performance and effective cleaner, to maintain body shop spray equipment at the highest operating efficiency. Cuts through all liquid paints, fast, enabling rapid switching of colours in high throughput shops.

Click here for pdf file

OR9 LACQUER THINNER

For reducing lacquer based paints, cleaning spray guns and spray equipment to maintain spray pattern consistency in automotive body shops. Helps ensure a good spray job.

TIP:Always use the minimum amount to obtain the best spray job, rather than the most the lacquer will tolerate!

BRAKE AND PARTS CLEANER

Cleans brake dust, road dirt, old lubricants and old brake fluid from drum and disc brake components, cylinders, rotors, CV joints and other automotive parts. Aerosol is Non Chlorinated so does not corrode, or, damage the environment! Low odour, helps reduce brake 'squeal' and dries fast with no residue.

PARTS CLEANER / PAINT-X THINNER

Mineral Spirits. A solvent cleaner used to pre-clean paintwork or alkyd (oil based) paint from brushes, thinning alkyd paints, varnishes and polyurethane, cleaning automotive tools, parts wash equipment, prior to reassembly or painting. Fast acting on oil and grease, will not damage most dried paints and when clean, final wash solvent is used, leaves little residue.

DEIONIZED WATER

The de-ionize process removes ions of calcium, sodium and chlorides and replaces them charged H+ and OH- ions. De-ionized water is a poor electrical conductor having a resistivity of 18.2 million ohm-cm (18.2 megaohm) and conductivity of 6 microsiemens. High purity water, or DI, de-ionized water, is used in electronic manufacturing, medical, laboratory, pharmaceutical, cosmetics, plating etc Use for diluting concentrated Rad AF or concentrated WW AF.

BATTERY ACID

A car battery is designed to provide a very large amount of current for a short period of time. Once the engine starts, the alternator provides all the current the vehicle needs. The specific gravity of this battery acid is 1.265, the concentration recommended for filling new or recycled lead-acid batteries. This battery acid is very pure, providing maximum performance between the lead, and lead oxide electrodes, aiding long, trouble free life.